A-XP1 Pneumatic Polyurea System

The A-XP1 is an “Entry-Level” Polyurea Spray Proportioner for Spray. This works with 200 Litre Drums & Drum Pumps (unlike the E-10hp which works from 20 litre hoppers). The Main Motor is Air-Powered and so it has a lower electrical requirement than E-XP or H-XP systems, but has a larger compressed air requirement.

• Basic Controls
• Low Output: 3 Litres/min = 1.5m²/min @ 2mm thick
• maximum hose length 220ft/66m
• Recommended for “On-The-Level” Spraying
• System is 32Amp Three Phase
• Requires 60cfm @ 100psi (20hp Compressor or larger)
• Easy to operate and maintain
• Best choice for affordability